{"title":"Washers","description":"\u003cp\u003eTwo jobs, two different parts, and they are not substitutes for one another.\u003c\/p\u003e\u003ch2\u003eFlat washers spread load\u003c\/h2\u003e\u003cp\u003eA flat washer puts the screw head’s clamp force onto a larger area. That matters on soft material — aluminium, plastic, wood — where a bare head would sink in and lose preload, and on an oversized or slotted hole where the head would otherwise have nothing to bear on. It also gives a moving head a clean surface to turn against instead of chewing the workpiece.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDIN 125A\u003c\/strong\u003e is the general-purpose pattern. \u003cstrong\u003eDIN 433\u003c\/strong\u003e is the small outside diameter pattern, sized for cylindrical heads — it fits under a socket head cap screw without standing proud of the head.\u003c\/p\u003e\u003ch2\u003eSplit lock washers resist vibration\u003c\/h2\u003e\u003cp\u003eA split lock washer to \u003cstrong\u003eDIN 127B\u003c\/strong\u003e is a single coil with a gap. Tightening flattens it, and the stored spring force keeps tension on the joint as it settles. The sharp ends of the split also bite into the head and the bearing surface.\u003c\/p\u003e\u003cp\u003eThey are less effective than a nylon insert lock nut and they mark whatever they sit against, so keep them away from finished surfaces. If you use both, the lock washer goes against the head and the flat washer against the workpiece — never the reverse.\u003c\/p\u003e\u003ch2\u003eSizing\u003c\/h2\u003e\u003cp\u003eWashers are called out by the screw they fit, not by their own bore: an “M4 washer” has a hole a little over 4 mm. Every listing gives inside diameter, outside diameter and thickness in millimetres and inches.\u003c\/p\u003e","products":[{"product_id":"m2-flat-washer-stainless-steel-304","title":"M2 Flat Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM2 Flat Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 Flat Washer, Stainless Steel 304\u003c\/strong\u003e — a M2 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.3 mm (0.012 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 125A, ISO 7089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.038 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522789929191,"sku":"PF-FW-M2-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-125a-a2-clean-candidate.jpg?v=1787892992"},{"product_id":"m2-5-flat-washer-stainless-steel-304","title":"M2.5 Flat Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM2.5 Flat Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Flat Washer, Stainless Steel 304\u003c\/strong\u003e — a M2.5 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.02 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e6.0 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 125A, ISO 7089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.089 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790027495,"sku":"PF-FW-M25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-125a-a2-clean-candidate_5f3e0084-88f8-44f3-ba42-0d3d0ae7c6e2.jpg?v=1787893013"},{"product_id":"m3-flat-washer-stainless-steel-304","title":"M3 Flat Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM3 Flat Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Flat Washer, Stainless Steel 304\u003c\/strong\u003e — a M3 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.02 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 125A, ISO 7089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.121 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790125799,"sku":"PF-FW-M3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-125a-a2-clean-candidate_6b647623-f8d7-4ce3-8d60-c3f4efd6c0a2.jpg?v=1787893040"},{"product_id":"m4-flat-washer-stainless-steel-304","title":"M4 Flat Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM4 Flat Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 Flat Washer, Stainless Steel 304\u003c\/strong\u003e — a M4 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.8 mm (0.031 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e9.0 mm (0.354 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 125A, ISO 7089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.311 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790224103,"sku":"PF-FW-M4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-125a-a2-clean-candidate_cf183860-660a-4216-b476-4f955e72617c.jpg?v=1787893100"},{"product_id":"m5-flat-washer-stainless-steel-304","title":"M5 Flat Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM5 Flat Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM5 Flat Washer, Stainless Steel 304\u003c\/strong\u003e — a M5 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.8 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.0 mm (0.039 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e10.0 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 125A, ISO 7089\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.448 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M5:\u003c\/strong\u003e 4.2 mm (0.165 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #10-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790289639,"sku":"PF-FW-M5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-125a-a2-clean-candidate_faca045f-166f-40b6-bd04-e6083eb57e17.jpg?v=1787893169"},{"product_id":"m3-flat-washer-small-od-stainless-steel-304","title":"M3 Flat Washer (Small OD), Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM3 Flat Washer (Small OD), Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Flat Washer (Small OD), Stainless Steel 304\u003c\/strong\u003e — a M3 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.02 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e6.0 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 433, ISO 7092\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.08 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790322407,"sku":"PF-FWS-M3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-433-a2-clean-candidate.jpg?v=1787893038"},{"product_id":"m4-flat-washer-small-od-stainless-steel-304","title":"M4 Flat Washer (Small OD), Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM4 Flat Washer (Small OD), Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 Flat Washer (Small OD), Stainless Steel 304\u003c\/strong\u003e — a M4 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.02 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e8.0 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 433, ISO 7092\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.142 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790387943,"sku":"PF-FWS-M4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-433-a2-clean-candidate_e5d94a19-20c6-4695-84bf-6dc0314feb32.jpg?v=1787893097"},{"product_id":"m5-flat-washer-small-od-stainless-steel-304","title":"M5 Flat Washer (Small OD), Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/flat-washers\"\u003eFlat Washers\u003c\/a\u003e › \u003cspan\u003eM5 Flat Washer (Small OD), Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM5 Flat Washer (Small OD), Stainless Steel 304\u003c\/strong\u003e — a M5 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.8 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.0 mm (0.039 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e9.0 mm (0.354 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 433, ISO 7092\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.33 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 5.5 mm (0.217 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M5:\u003c\/strong\u003e 4.2 mm (0.165 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #10-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/flat-washers\"\u003eAll flat washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790453479,"sku":"PF-FWS-M5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-433-a2-clean-candidate_7eb62d52-9960-41c1-88ed-e0863f4c684c.jpg?v=1787893167"},{"product_id":"m3-split-lock-washer-stainless-steel-304","title":"M3 Split Lock Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/split-lock-washers\"\u003eSplit Lock Washers\u003c\/a\u003e › \u003cspan\u003eM3 Split Lock Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Split Lock Washer, Stainless Steel 304\u003c\/strong\u003e — a M3 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.8 mm (0.031 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e6.2 mm (0.244 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 127B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.144 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/split-lock-washers\"\u003eAll split lock washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790486247,"sku":"PF-LW-M3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-127b-a2-watermark-removed.png?v=1787893046"},{"product_id":"m4-split-lock-washer-stainless-steel-304","title":"M4 Split Lock Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/split-lock-washers\"\u003eSplit Lock Washers\u003c\/a\u003e › \u003cspan\u003eM4 Split Lock Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 Split Lock Washer, Stainless Steel 304\u003c\/strong\u003e — a M4 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e0.9 mm (0.035 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.6 mm (0.299 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 127B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.23 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/split-lock-washers\"\u003eAll split lock washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790551783,"sku":"PF-LW-M4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-127b-a2-watermark-removed_c097bccf-db61-40f3-9595-57cd0d008215.png?v=1787893106"},{"product_id":"m5-split-lock-washer-stainless-steel-304","title":"M5 Split Lock Washer, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/split-lock-washers\"\u003eSplit Lock Washers\u003c\/a\u003e › \u003cspan\u003eM5 Split Lock Washer, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM5 Split Lock Washer, Stainless Steel 304\u003c\/strong\u003e — a M5 washer in Stainless Steel 304. Distributes clamp load over the joint surface and protects the finish beneath the head or nut.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.8 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e1.2 mm (0.047 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e9.2 mm (0.362 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eRound\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 127B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.438 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M5:\u003c\/strong\u003e 4.2 mm (0.165 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #10-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/split-lock-washers\"\u003eAll split lock washers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522790650087,"sku":"PF-LW-M5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-127b-a2-watermark-removed_85932cf6-c843-44dc-bad5-ea9b1fa95ba8.png?v=1787893175"}],"url":"https:\/\/planetfasteners.com\/collections\/washers.oembed","provider":"Planet Fasteners","version":"1.0","type":"link"}