{"title":"Socket Head Cap Screws","description":"\u003cp\u003eThe cylindrical head with an internal hex drive, to ISO 4762 and DIN 912. The head is the smallest that will carry the full strength of the shank, which is why it is the standard fastener wherever a bolt has to sit in a counterbore or against a tight shoulder.\u003c\/p\u003e\n\u003ch3\u003eWhy the socket drive matters\u003c\/h3\u003e\n\u003cp\u003eAn internal hex takes far more torque than a slot or a cross recess of the same head diameter, and the key engages six flats instead of two. It also drives from directly above, so it works in a bore where no wrench would fit. The trade-off is that a rounded socket cannot be gripped by anything — use the correct key size and seat it fully.\u003c\/p\u003e\n\u003ch3\u003eSizing the hole\u003c\/h3\u003e\n\u003cp\u003eEach listing carries the tap drill for a threaded hole at 75% engagement and the ISO 273 medium clearance hole for a through hole, in both millimetres and inches. The full tables are on the \u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003etap drill chart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cp\u003eThese are 304 stainless: non-magnetic in the annealed condition, resistant to indoor and general atmospheric corrosion, but not the right choice against salt spray or chlorides — that is 316. Stainless galls readily against stainless, so on a joint you expect to open again, use an anti-seize compound.\u003c\/p\u003e\n\u003cp\u003eFor the equivalent standards in the ASME system, see the \u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003estandards cross-reference\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eShop by thread size\u003c\/h2\u003e\u003cp\u003eEach size has its own page with the tap drill, clearance hole and hex key for that thread: \u003ca href=\"\/collections\/m1-6-socket-head-cap-screws\"\u003eM1.6\u003c\/a\u003e, \u003ca href=\"\/collections\/m2-socket-head-cap-screws\"\u003eM2\u003c\/a\u003e, \u003ca href=\"\/collections\/m2-5-socket-head-cap-screws\"\u003eM2.5\u003c\/a\u003e, \u003ca href=\"\/collections\/m3-socket-head-cap-screws\"\u003eM3\u003c\/a\u003e, \u003ca href=\"\/collections\/m4-socket-head-cap-screws\"\u003eM4\u003c\/a\u003e, \u003ca href=\"\/collections\/m5-socket-head-cap-screws\"\u003eM5\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"m1-6-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.13 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780066023,"sku":"PF-SHCS-M16-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_dbb3837b-4634-4bd4-9a6a-f9d219caa8c5.jpg?v=1787892263"},{"product_id":"m1-6-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.144 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780098791,"sku":"PF-SHCS-M16-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_16538aa3-6d4e-466e-9854-8c0c46ce817c.jpg?v=1787892260"},{"product_id":"m1-6-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.157 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780164327,"sku":"PF-SHCS-M16-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b5240908-ef7d-478d-8c60-62f49c5d0536.jpg?v=1787892258"},{"product_id":"m1-6-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.171 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780197095,"sku":"PF-SHCS-M16-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_4b9ada8f-9a1b-442c-9039-92fc9b1ca9e2.jpg?v=1787892255"},{"product_id":"m1-6-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.198 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780262631,"sku":"PF-SHCS-M16-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e108ab89-1ecb-4d70-a621-42fc269ac447.jpg?v=1787892252"},{"product_id":"m1-6-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.225 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780295399,"sku":"PF-SHCS-M16-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_92fc835f-438f-4ed6-953a-dffbc739c29a.jpg?v=1787892249"},{"product_id":"m1-6-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.252 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780328167,"sku":"PF-SHCS-M16-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b3e0919f-ac72-4964-a3ff-3271533c60ee.jpg?v=1787892246"},{"product_id":"m1-6-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.306 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780393703,"sku":"PF-SHCS-M16-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_865daaf3-c463-4f09-8e79-be4b8a0e6e15.jpg?v=1787892243"},{"product_id":"m1-6-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.36 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780426471,"sku":"PF-SHCS-M16-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_02c7638b-f1ed-4954-8799-13f0d40cd159.jpg?v=1787892238"},{"product_id":"m1-6-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.427 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780492007,"sku":"PF-SHCS-M16-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a1c065b0-d6cc-45c2-92cb-ae6c32445d5a.jpg?v=1787892233"},{"product_id":"m2-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.243 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780524775,"sku":"PF-SHCS-M2-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_26f65998-32a6-47da-a09a-e350d897cae3.jpg?v=1787892229"},{"product_id":"m2-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.264 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780590311,"sku":"PF-SHCS-M2-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_f5610068-baa0-40ad-97ba-8e4804e0f9f3.jpg?v=1787892226"},{"product_id":"m2-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.285 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780623079,"sku":"PF-SHCS-M2-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6a22a00f-7f8a-4f72-a009-bd6116ec12ee.jpg?v=1787892223"},{"product_id":"m2-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.306 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780688615,"sku":"PF-SHCS-M2-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_54784273-11eb-4359-80ec-1a934e89183b.jpg?v=1787892220"},{"product_id":"m2-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.349 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780721383,"sku":"PF-SHCS-M2-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e8f55e6c-90a2-49ac-a725-f5df57d7ac9b.jpg?v=1787892217"},{"product_id":"m2-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.391 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780786919,"sku":"PF-SHCS-M2-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1.jpg?v=1787892214"},{"product_id":"m2-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.433 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780852455,"sku":"PF-SHCS-M2-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_8bddadcb-e5a1-4146-8f6a-69efcdaa2f03.jpg?v=1787892994"},{"product_id":"m2-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.517 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780885223,"sku":"PF-SHCS-M2-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3bbd40c8-cd07-410a-bd92-58600333dcf0.jpg?v=1787892997"},{"product_id":"m2-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.602 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780950759,"sku":"PF-SHCS-M2-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_5b6b2cdd-cdfc-4a0c-bca0-ab222be2e454.jpg?v=1787892999"},{"product_id":"m2-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.707 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781016295,"sku":"PF-SHCS-M2-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_10e345b4-904c-476d-9be6-b2c851a9806f.jpg?v=1787893001"},{"product_id":"m2-5-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.414 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781049063,"sku":"PF-SHCS-M25-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_67bf160d-a2d7-4272-be74-c1d557ed4f35.jpg?v=1787893027"},{"product_id":"m2-5-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.447 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781212903,"sku":"PF-SHCS-M25-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b587d656-c91e-4d85-979f-1b12fc48ad51.jpg?v=1787893029"},{"product_id":"m2-5-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.48 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781245671,"sku":"PF-SHCS-M25-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_7987e3bd-740d-41db-9b52-3f19d1c7b22e.jpg?v=1787893031"},{"product_id":"m2-5-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.513 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781376743,"sku":"PF-SHCS-M25-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a10aa06a-db20-4f4f-967b-541ea73a6659.jpg?v=1787893033"},{"product_id":"m2-5-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.579 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781638887,"sku":"PF-SHCS-M25-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d975e28d-68e7-464d-ad2f-a8d1f58bb407.jpg?v=1787893035"},{"product_id":"m2-5-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.645 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781671655,"sku":"PF-SHCS-M25-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_249159e7-3021-467b-9499-69edeef36058.jpg?v=1787893015"},{"product_id":"m2-5-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.711 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781901031,"sku":"PF-SHCS-M25-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d189c32f-37fa-4fb2-8108-0ddac0e13d18.jpg?v=1787893018"},{"product_id":"m2-5-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.842 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782064871,"sku":"PF-SHCS-M25-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a2f5c557-c5cb-496e-9c81-7d2155f6ac11.jpg?v=1787893020"},{"product_id":"m2-5-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.974 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782097639,"sku":"PF-SHCS-M25-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b4b2ef7c-06f1-44a2-8dcc-02a5efc491b4.jpg?v=1787893022"},{"product_id":"m2-5-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.139 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782163175,"sku":"PF-SHCS-M25-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6684d00e-7d73-4bae-ba62-4214ef56555a.jpg?v=1787893024"},{"product_id":"m3-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.708 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782327015,"sku":"PF-SHCS-M3-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e7b4ac33-88f4-4af2-8ab3-7da9747122b0.jpg?v=1787893077"},{"product_id":"m3-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.755 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782359783,"sku":"PF-SHCS-M3-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_75b71b9e-8a4a-4881-8b2a-93e560ca7ceb.jpg?v=1787893079"},{"product_id":"m3-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.802 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782425319,"sku":"PF-SHCS-M3-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_34021ea3-a34c-4598-995f-bb924a9b54db.jpg?v=1787893081"},{"product_id":"m3-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.85 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782490855,"sku":"PF-SHCS-M3-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_fd95aa0f-2ebe-42d6-9339-1cc2b41360ad.jpg?v=1787893088"},{"product_id":"m3-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.945 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782752999,"sku":"PF-SHCS-M3-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_05926edb-19e7-48d3-8f60-1e6ab2dab8c9.jpg?v=1787893095"},{"product_id":"m3-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.04 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782785767,"sku":"PF-SHCS-M3-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3b8b6c0e-9a5f-4184-af75-0711ed4859d5.jpg?v=1787893052"},{"product_id":"m3-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.135 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783113447,"sku":"PF-SHCS-M3-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_7eea1b46-f4bc-4754-826d-02bdfc351e6b.jpg?v=1787893059"},{"product_id":"m3-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.324 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783375591,"sku":"PF-SHCS-M3-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_4cc9a772-cb3c-40d7-bc04-dc12835a3c96.jpg?v=1787893066"},{"product_id":"m3-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.514 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783473895,"sku":"PF-SHCS-M3-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_5d91cada-9734-40ca-8bfc-bc3844b9ceaf.jpg?v=1787893073"},{"product_id":"m3-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.751 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783539431,"sku":"PF-SHCS-M3-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_61f90662-bfaf-462a-8821-9f17518ceb47.jpg?v=1787893075"},{"product_id":"m4-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.474 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783572199,"sku":"PF-SHCS-M4-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_66876777-4420-47b8-bf95-b0e3376a9c91.jpg?v=1787893147"},{"product_id":"m4-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.558 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783637735,"sku":"PF-SHCS-M4-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_bd4ea723-d140-4284-8f1f-00e7431d36e6.jpg?v=1787893149"},{"product_id":"m4-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.642 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783703271,"sku":"PF-SHCS-M4-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_707aa4a8-434b-4537-83e7-ecae79d3c1c2.jpg?v=1787893151"},{"product_id":"m4-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.727 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783768807,"sku":"PF-SHCS-M4-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_23fd2cc6-a3bd-4631-b135-f03f203dffb8.jpg?v=1787893158"},{"product_id":"m4-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.895 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783834343,"sku":"PF-SHCS-M4-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6d585818-0d8a-4299-9247-451d95e351e2.jpg?v=1787893165"},{"product_id":"m4-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.064 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783867111,"sku":"PF-SHCS-M4-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_8dc47fd0-40a2-4fa7-850a-610960841f5b.jpg?v=1787893115"},{"product_id":"m4-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.233 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783932647,"sku":"PF-SHCS-M4-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a1e683d5-ab89-4d2e-a3b7-7231dbd36bc0.jpg?v=1787893124"},{"product_id":"m4-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.57 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783998183,"sku":"PF-SHCS-M4-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_ff6b5175-4aee-4c85-8470-30902c740eef.jpg?v=1787893133"},{"product_id":"m4-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.908 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522784030951,"sku":"PF-SHCS-M4-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3bda96e5-2566-4e13-ba83-69c31d5207e8.jpg?v=1787893142"},{"product_id":"m4-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e3.329 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522784096487,"sku":"PF-SHCS-M4-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d37a214d-9eba-4d79-9e7b-c75e4f932e9d.jpg?v=1787893144"}],"url":"https:\/\/planetfasteners.com\/collections\/socket-head-cap-screws.oembed?page=2","provider":"Planet Fasteners","version":"1.0","type":"link"}