{"title":"Screws","description":"\u003cp\u003eEvery screw here is an externally threaded machine screw: a straight shank with a machine thread the whole way, meant for a tapped hole or a nut. Nothing in this section is self-tapping and nothing is a wood screw. What separates the four families is the head, and the head is what you choose on.\u003c\/p\u003e\u003ch2\u003eChoosing a head\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSocket head cap\u003c\/strong\u003e is the default when torque matters. The cylindrical head is small in diameter and the internal hex engages six flats, so it takes far more torque than any cross recess and works down a counterbore where no wrench would fit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eButton head\u003c\/strong\u003e trades torque for profile. The domed head sits low and rounded, which is what you want on an exposed surface or where something slides past. The socket is shallower than a cap screw’s, so it will round out sooner — seat the key fully.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlat countersunk\u003c\/strong\u003e sits flush. It needs a matching countersunk hole and it centres itself in that cone, which also means it will pull a part sideways if the hole is off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePan head Phillips\u003c\/strong\u003e is the general-purpose fastener: driven with a screwdriver, no counterbore, no countersink. It is the cheapest to install and the weakest to drive, because a cross recess cams out by design.\u003c\/p\u003e\u003ch2\u003eThreads and sizes\u003c\/h2\u003e\u003cp\u003eMetric runs M1.6 through M6 in coarse pitch, imperial runs #4-40 and #6-32. Metric and imperial threads of similar diameter are never interchangeable — M3 and #4-40 differ in both pitch and major diameter, and forcing one into the other strips the softer part. Each listing states the nearest imperial equivalent and repeats that warning.\u003c\/p\u003e\u003ch2\u003eWhat is on every listing\u003c\/h2\u003e\u003cp\u003eThread size and pitch, head and drive dimensions in millimetres and inches, the hex key or driver size, the tap drill for a threaded hole at 75% engagement, the ISO 273 medium clearance hole for a through hole, and the DIN and ISO standards the part is built to. Full tables are on the \u003ca href=\"\/pages\/reference\"\u003ereference pages\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eMaterial\u003c\/h2\u003e\u003cp\u003eStainless steel 304 throughout: non-magnetic in the annealed condition, resistant to indoor and general atmospheric corrosion, not rated for prolonged salt water. Use 316 where chlorides are present.\u003c\/p\u003e","products":[{"product_id":"m1-6-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.13 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780066023,"sku":"PF-SHCS-M16-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_dbb3837b-4634-4bd4-9a6a-f9d219caa8c5.jpg?v=1787892263"},{"product_id":"m1-6-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.144 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780098791,"sku":"PF-SHCS-M16-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_16538aa3-6d4e-466e-9854-8c0c46ce817c.jpg?v=1787892260"},{"product_id":"m1-6-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.157 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780164327,"sku":"PF-SHCS-M16-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b5240908-ef7d-478d-8c60-62f49c5d0536.jpg?v=1787892258"},{"product_id":"m1-6-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.171 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780197095,"sku":"PF-SHCS-M16-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_4b9ada8f-9a1b-442c-9039-92fc9b1ca9e2.jpg?v=1787892255"},{"product_id":"m1-6-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.198 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780262631,"sku":"PF-SHCS-M16-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e108ab89-1ecb-4d70-a621-42fc269ac447.jpg?v=1787892252"},{"product_id":"m1-6-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.225 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780295399,"sku":"PF-SHCS-M16-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_92fc835f-438f-4ed6-953a-dffbc739c29a.jpg?v=1787892249"},{"product_id":"m1-6-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.252 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780328167,"sku":"PF-SHCS-M16-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b3e0919f-ac72-4964-a3ff-3271533c60ee.jpg?v=1787892246"},{"product_id":"m1-6-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.306 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780393703,"sku":"PF-SHCS-M16-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_865daaf3-c463-4f09-8e79-be4b8a0e6e15.jpg?v=1787892243"},{"product_id":"m1-6-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.36 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780426471,"sku":"PF-SHCS-M16-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_02c7638b-f1ed-4954-8799-13f0d40cd159.jpg?v=1787892238"},{"product_id":"m1-6-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM1.6 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M1.6 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.35 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.0 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.427 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 1.8 mm (0.071 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M1.6:\u003c\/strong\u003e 1.25 mm (0.049 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #0-80 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780492007,"sku":"PF-SHCS-M16-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a1c065b0-d6cc-45c2-92cb-ae6c32445d5a.jpg?v=1787892233"},{"product_id":"m2-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.243 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780524775,"sku":"PF-SHCS-M2-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_26f65998-32a6-47da-a09a-e350d897cae3.jpg?v=1787892229"},{"product_id":"m2-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.264 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780590311,"sku":"PF-SHCS-M2-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_f5610068-baa0-40ad-97ba-8e4804e0f9f3.jpg?v=1787892226"},{"product_id":"m2-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.285 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780623079,"sku":"PF-SHCS-M2-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6a22a00f-7f8a-4f72-a009-bd6116ec12ee.jpg?v=1787892223"},{"product_id":"m2-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.306 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780688615,"sku":"PF-SHCS-M2-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_54784273-11eb-4359-80ec-1a934e89183b.jpg?v=1787892220"},{"product_id":"m2-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.349 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780721383,"sku":"PF-SHCS-M2-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e8f55e6c-90a2-49ac-a725-f5df57d7ac9b.jpg?v=1787892217"},{"product_id":"m2-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.391 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780786919,"sku":"PF-SHCS-M2-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1.jpg?v=1787892214"},{"product_id":"m2-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.433 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780852455,"sku":"PF-SHCS-M2-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_8bddadcb-e5a1-4146-8f6a-69efcdaa2f03.jpg?v=1787892994"},{"product_id":"m2-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.517 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780885223,"sku":"PF-SHCS-M2-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3bbd40c8-cd07-410a-bd92-58600333dcf0.jpg?v=1787892997"},{"product_id":"m2-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.602 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522780950759,"sku":"PF-SHCS-M2-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_5b6b2cdd-cdfc-4a0c-bca0-ab222be2e454.jpg?v=1787892999"},{"product_id":"m2-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M2 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.4 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e3.8 mm (0.15 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.707 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.4 mm (0.094 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2:\u003c\/strong\u003e 1.6 mm (0.063 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 1.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #2-56 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781016295,"sku":"PF-SHCS-M2-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_10e345b4-904c-476d-9be6-b2c851a9806f.jpg?v=1787893001"},{"product_id":"m2-5-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.414 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781049063,"sku":"PF-SHCS-M25-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_67bf160d-a2d7-4272-be74-c1d557ed4f35.jpg?v=1787893027"},{"product_id":"m2-5-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.447 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781212903,"sku":"PF-SHCS-M25-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b587d656-c91e-4d85-979f-1b12fc48ad51.jpg?v=1787893029"},{"product_id":"m2-5-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.48 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781245671,"sku":"PF-SHCS-M25-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_7987e3bd-740d-41db-9b52-3f19d1c7b22e.jpg?v=1787893031"},{"product_id":"m2-5-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.513 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781376743,"sku":"PF-SHCS-M25-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a10aa06a-db20-4f4f-967b-541ea73a6659.jpg?v=1787893033"},{"product_id":"m2-5-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.579 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781638887,"sku":"PF-SHCS-M25-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d975e28d-68e7-464d-ad2f-a8d1f58bb407.jpg?v=1787893035"},{"product_id":"m2-5-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.645 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781671655,"sku":"PF-SHCS-M25-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_249159e7-3021-467b-9499-69edeef36058.jpg?v=1787893015"},{"product_id":"m2-5-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.711 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522781901031,"sku":"PF-SHCS-M25-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d189c32f-37fa-4fb2-8108-0ddac0e13d18.jpg?v=1787893018"},{"product_id":"m2-5-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.842 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782064871,"sku":"PF-SHCS-M25-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a2f5c557-c5cb-496e-9c81-7d2155f6ac11.jpg?v=1787893020"},{"product_id":"m2-5-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.974 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782097639,"sku":"PF-SHCS-M25-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_b4b2ef7c-06f1-44a2-8dcc-02a5efc491b4.jpg?v=1787893022"},{"product_id":"m2-5-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M2.5 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e4.5 mm (0.177 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.139 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782163175,"sku":"PF-SHCS-M25-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6684d00e-7d73-4bae-ba62-4214ef56555a.jpg?v=1787893024"},{"product_id":"m3-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.708 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782327015,"sku":"PF-SHCS-M3-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_e7b4ac33-88f4-4af2-8ab3-7da9747122b0.jpg?v=1787893077"},{"product_id":"m3-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.755 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782359783,"sku":"PF-SHCS-M3-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_75b71b9e-8a4a-4881-8b2a-93e560ca7ceb.jpg?v=1787893079"},{"product_id":"m3-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.802 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782425319,"sku":"PF-SHCS-M3-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_34021ea3-a34c-4598-995f-bb924a9b54db.jpg?v=1787893081"},{"product_id":"m3-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.85 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782490855,"sku":"PF-SHCS-M3-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_fd95aa0f-2ebe-42d6-9339-1cc2b41360ad.jpg?v=1787893088"},{"product_id":"m3-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e0.945 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782752999,"sku":"PF-SHCS-M3-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_05926edb-19e7-48d3-8f60-1e6ab2dab8c9.jpg?v=1787893095"},{"product_id":"m3-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.04 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522782785767,"sku":"PF-SHCS-M3-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3b8b6c0e-9a5f-4184-af75-0711ed4859d5.jpg?v=1787893052"},{"product_id":"m3-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.135 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783113447,"sku":"PF-SHCS-M3-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_7eea1b46-f4bc-4754-826d-02bdfc351e6b.jpg?v=1787893059"},{"product_id":"m3-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.324 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783375591,"sku":"PF-SHCS-M3-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_4cc9a772-cb3c-40d7-bc04-dc12835a3c96.jpg?v=1787893066"},{"product_id":"m3-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.514 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783473895,"sku":"PF-SHCS-M3-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_5d91cada-9734-40ca-8bfc-bc3844b9ceaf.jpg?v=1787893073"},{"product_id":"m3-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M3 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM3 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M3 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.751 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 2.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783539431,"sku":"PF-SHCS-M3-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_61f90662-bfaf-462a-8821-9f17518ceb47.jpg?v=1787893075"},{"product_id":"m4-x-3mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 3mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 3mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e3 mm (0.118 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.474 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783572199,"sku":"PF-SHCS-M4-3-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_66876777-4420-47b8-bf95-b0e3376a9c91.jpg?v=1787893147"},{"product_id":"m4-x-4mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 4mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 4mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 mm (0.157 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.558 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783637735,"sku":"PF-SHCS-M4-4-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_bd4ea723-d140-4284-8f1f-00e7431d36e6.jpg?v=1787893149"},{"product_id":"m4-x-5mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 5mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 5mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.642 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783703271,"sku":"PF-SHCS-M4-5-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_707aa4a8-434b-4537-83e7-ecae79d3c1c2.jpg?v=1787893151"},{"product_id":"m4-x-6mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 6mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 6mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.727 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783768807,"sku":"PF-SHCS-M4-6-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_23fd2cc6-a3bd-4631-b135-f03f203dffb8.jpg?v=1787893158"},{"product_id":"m4-x-8mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 8mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 8mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.895 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783834343,"sku":"PF-SHCS-M4-8-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_6d585818-0d8a-4299-9247-451d95e351e2.jpg?v=1787893165"},{"product_id":"m4-x-10mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 10mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 10mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.064 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783867111,"sku":"PF-SHCS-M4-10-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_8dc47fd0-40a2-4fa7-850a-610960841f5b.jpg?v=1787893115"},{"product_id":"m4-x-12mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 12mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 12mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e12 mm (0.472 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.233 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783932647,"sku":"PF-SHCS-M4-12-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_a1e683d5-ab89-4d2e-a3b7-7231dbd36bc0.jpg?v=1787893124"},{"product_id":"m4-x-16mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 16mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 16mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e16 mm (0.63 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.57 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522783998183,"sku":"PF-SHCS-M4-16-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_ff6b5175-4aee-4c85-8470-30902c740eef.jpg?v=1787893133"},{"product_id":"m4-x-20mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 20mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 20mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.908 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522784030951,"sku":"PF-SHCS-M4-20-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_3bda96e5-2566-4e13-ba83-69c31d5207e8.jpg?v=1787893142"},{"product_id":"m4-x-25mm-socket-head-cap-screw-stainless-steel-304","title":"M4 x 25mm Socket Head Cap Screw, Stainless Steel 304","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eSocket Head Cap Screws\u003c\/a\u003e › \u003cspan\u003eM4 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM4 x 25mm Socket Head Cap Screw, Stainless Steel 304\u003c\/strong\u003e — a M4 socket cap screw in Stainless Steel 304, driven with a hex socket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.7 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutside diameter\u003c\/th\u003e\n\u003ctd\u003e7.0 mm (0.276 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead style\u003c\/th\u003e\n\u003ctd\u003eSocket Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eHex Socket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless Steel 304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength grade \/ class\u003c\/th\u003e\n\u003ctd\u003eA2-70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eISO 4762, DIN 912\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e400 °C (752 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e3.329 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7318.15.2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 4.5 mm (0.177 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M4:\u003c\/strong\u003e 3.3 mm (0.13 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex key required:\u003c\/strong\u003e 3.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #8-32 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Stainless Steel 304\u003c\/h3\u003e\u003cp\u003e304 stainless resists general atmospheric and indoor corrosion and is non-magnetic in the annealed condition. It is not the right choice for salt spray or chloride exposure — 316 is. Stainless threads can gall under speed or load; back off the driver and use an anti-seize compound on repeated assemblies.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/socket-head-cap-screws\"\u003eAll socket head cap screws\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522784096487,"sku":"PF-SHCS-M4-25-SS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/din-912-a2-1_d37a214d-9eba-4d79-9e7b-c75e4f932e9d.jpg?v=1787893144"}],"url":"https:\/\/planetfasteners.com\/collections\/screws.oembed?page=2","provider":"Planet Fasteners","version":"1.0","type":"link"}