{"title":"Brass Standoffs","description":"\u003cp\u003eBrass is the standoff you choose when the mount has to conduct. Machined from hex bar and nickel plated, these carry a ground path from the board’s mounting pad through the standoff to the chassis — which is exactly what you want for EMI shielding and exactly what you must avoid if the pad is not meant to be grounded.\u003c\/p\u003e\u003ch2\u003eBrass against nylon\u003c\/h2\u003e\u003cp\u003eBrass is stiff, holds thread accurately, takes repeated assembly without wear, and stays dimensionally stable with temperature. It conducts and it is heavier. \u003ca href=\"\/collections\/nylon-standoffs\"\u003eNylon\u003c\/a\u003e insulates, weighs almost nothing and costs less, but creeps under sustained load and strips more easily. Pick brass for anything that will be opened and closed repeatedly, for heavier boards, and for every mount that carries ground.\u003c\/p\u003e\u003ch2\u003eMale-female and female-female\u003c\/h2\u003e\u003cp\u003eA male-female standoff has a threaded stud at one end and a tapped hole at the other: it screws into the chassis and takes a screw from the board side. A female-female is tapped both ends and needs a screw at each end. Male-female is the usual choice for the bottom layer, female-female for stacking a second board above the first.\u003c\/p\u003e\u003ch2\u003eSizing\u003c\/h2\u003e\u003cp\u003eLength is the body length, measured across the hex — the male stud is extra and is stated separately. Every listing gives body length, across-flats, thread and stud length in millimetres and inches.\u003c\/p\u003e","products":[{"product_id":"m2-5-brass-hex-standoff-male-female-6mm","title":"M2.5 Brass Hex Standoff, Male-Female, 6mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Male-Female, 6mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Male-Female, 6mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.104 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777477351,"sku":"PF-STD-M25-BR-MF-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_13210995-a17a-42f1-a061-441027148456.jpg?v=1787882433"},{"product_id":"m2-5-brass-hex-standoff-male-female-10mm","title":"M2.5 Brass Hex Standoff, Male-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Male-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Male-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.84 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777542887,"sku":"PF-STD-M25-BR-MF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_d16a7298-e57d-449a-ae9f-7852b806f4bb.jpg?v=1787882427"},{"product_id":"m2-5-brass-hex-standoff-male-female-15mm","title":"M2.5 Brass Hex Standoff, Male-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Male-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Male-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.76 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777608423,"sku":"PF-STD-M25-BR-MF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_385d3387-ffa1-4f79-84a1-40e9f7dc37b6.jpg?v=1787882421"},{"product_id":"m2-5-brass-hex-standoff-female-female-6mm","title":"M2.5 Brass Hex Standoff, Female-Female, 6mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Female-Female, 6mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Female-Female, 6mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.104 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777641191,"sku":"PF-STD-M25-BR-FF-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_8de74e90-366d-4405-a73e-36f960aa2833.jpg?v=1787882415"},{"product_id":"m2-5-brass-hex-standoff-female-female-10mm","title":"M2.5 Brass Hex Standoff, Female-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Female-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Female-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.84 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777706727,"sku":"PF-STD-M25-BR-FF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_cc4581ba-4106-4f6a-b3bc-7862cbdd3733.jpg?v=1787882409"},{"product_id":"m2-5-brass-hex-standoff-female-female-15mm","title":"M2.5 Brass Hex Standoff, Female-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM2.5 Brass Hex Standoff, Female-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM2.5 Brass Hex Standoff, Female-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.45 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.0 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.76 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 2.9 mm (0.114 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M2.5:\u003c\/strong\u003e 2.05 mm (0.081 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #3-48 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777772263,"sku":"PF-STD-M25-BR-FF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_4884aa98-7894-4f0f-ab93-8c857b6abe63.jpg?v=1787882403"},{"product_id":"m3-brass-hex-standoff-male-female-5mm","title":"M3 Brass Hex Standoff, Male-Female, 5mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 5mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 5mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.113 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777805031,"sku":"PF-STD-M3-BR-MF-5","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_25405105-e217-4c3c-8b08-952a9447e752.jpg?v=1787882397"},{"product_id":"m3-brass-hex-standoff-male-female-8mm","title":"M3 Brass Hex Standoff, Male-Female, 8mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 8mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 8mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.781 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777870567,"sku":"PF-STD-M3-BR-MF-8","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_2166dca2-8456-46b8-ba56-be778a7afdac.jpg?v=1787882392"},{"product_id":"m3-brass-hex-standoff-male-female-10mm","title":"M3 Brass Hex Standoff, Male-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.226 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777936103,"sku":"PF-STD-M3-BR-MF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_355871ec-1a0f-4c5e-80cf-adb35ea9cb7f.jpg?v=1787882387"},{"product_id":"m3-brass-hex-standoff-male-female-15mm","title":"M3 Brass Hex Standoff, Male-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e3.34 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522777968871,"sku":"PF-STD-M3-BR-MF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_25977e6d-6f19-4185-891d-77f2972ba782.jpg?v=1787882381"},{"product_id":"m3-brass-hex-standoff-male-female-20mm","title":"M3 Brass Hex Standoff, Male-Female, 20mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 20mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 20mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e4.453 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778034407,"sku":"PF-STD-M3-BR-MF-20","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main_7fd7da4c-c493-40a6-a33c-04d9a8b41752.jpg?v=1787882376"},{"product_id":"m3-brass-hex-standoff-male-female-25mm","title":"M3 Brass Hex Standoff, Male-Female, 25mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Male-Female, 25mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Male-Female, 25mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e5.566 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778099943,"sku":"PF-STD-M3-BR-MF-25","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-mf-main.jpg?v=1787882371"},{"product_id":"m3-brass-hex-standoff-female-female-5mm","title":"M3 Brass Hex Standoff, Female-Female, 5mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 5mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 5mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e5 mm (0.197 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.113 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778132711,"sku":"PF-STD-M3-BR-FF-5","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_258b2c56-3b28-4659-918c-9e06e4e62dcc.jpg?v=1787882366"},{"product_id":"m3-brass-hex-standoff-female-female-8mm","title":"M3 Brass Hex Standoff, Female-Female, 8mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 8mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 8mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e8 mm (0.315 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.781 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778198247,"sku":"PF-STD-M3-BR-FF-8","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_0ee0744f-f04f-4c4b-af8c-9d4afe3673ec.jpg?v=1787882361"},{"product_id":"m3-brass-hex-standoff-female-female-10mm","title":"M3 Brass Hex Standoff, Female-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.226 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778263783,"sku":"PF-STD-M3-BR-FF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_9c547575-5f3f-41db-8d06-8d4f20a6bff8.jpg?v=1787882356"},{"product_id":"m3-brass-hex-standoff-female-female-15mm","title":"M3 Brass Hex Standoff, Female-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e3.34 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778296551,"sku":"PF-STD-M3-BR-FF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_50d34b6b-ee04-4b15-b23a-2f87efafc617.jpg?v=1787882351"},{"product_id":"m3-brass-hex-standoff-female-female-20mm","title":"M3 Brass Hex Standoff, Female-Female, 20mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 20mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 20mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e20 mm (0.787 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e4.453 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778362087,"sku":"PF-STD-M3-BR-FF-20","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main_18cfd2ba-fd0b-4871-b18d-fb55eedc6424.jpg?v=1787882346"},{"product_id":"m3-brass-hex-standoff-female-female-25mm","title":"M3 Brass Hex Standoff, Female-Female, 25mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003eM3 Brass Hex Standoff, Female-Female, 25mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eM3 Brass Hex Standoff, Female-Female, 25mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread pitch\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (coarse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e25 mm (0.984 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e5.5 mm (0.217 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e5.566 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance hole:\u003c\/strong\u003e 3.4 mm (0.134 in) — ISO 273 medium fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap drill for M3:\u003c\/strong\u003e 2.5 mm (0.098 in) at 75% thread engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNearest imperial thread:\u003c\/strong\u003e #4-40 — similar in diameter but \u003cem\u003enot interchangeable\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522778427623,"sku":"PF-STD-M3-BR-FF-25","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/brass-ff-main.jpg?v=1787882339"},{"product_id":"4-40-brass-hex-standoff-male-female-6mm","title":"#4-40 Brass Hex Standoff, Male-Female, 6mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Male-Female, 6mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Male-Female, 6mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.001 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779607271,"sku":"PF-STD-4-40-BR-MF-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/125375_fd67bf6d-207d-4719-9bbb-5dbc1396c04d.jpg?v=1787757450"},{"product_id":"4-40-brass-hex-standoff-male-female-10mm","title":"#4-40 Brass Hex Standoff, Male-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Male-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Male-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.668 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779640039,"sku":"PF-STD-4-40-BR-MF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/125375_9c6c1779-4959-4c0a-b2cf-8f787dc3a02b.jpg?v=1787757451"},{"product_id":"4-40-brass-hex-standoff-male-female-15mm","title":"#4-40 Brass Hex Standoff, Male-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Male-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Male-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with male thread at one end and a female thread at the other. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eMale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.501 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779738343,"sku":"PF-STD-4-40-BR-MF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/125375_eebc3db1-c711-45e2-b170-8c67fd96f99b.jpg?v=1787757453"},{"product_id":"4-40-brass-hex-standoff-female-female-6mm","title":"#4-40 Brass Hex Standoff, Female-Female, 6mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Female-Female, 6mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Female-Female, 6mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e6 mm (0.236 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.001 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779771111,"sku":"PF-STD-4-40-BR-FF-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/PCNCHSS_stoyka_85ec2830-d47c-45f0-9c38-6930ea977720.jpg?v=1787757453"},{"product_id":"4-40-brass-hex-standoff-female-female-10mm","title":"#4-40 Brass Hex Standoff, Female-Female, 10mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Female-Female, 10mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Female-Female, 10mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e10 mm (0.394 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e1.668 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779836647,"sku":"PF-STD-4-40-BR-FF-10","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/PCNCHSS_stoyka_c3de0eea-3009-4b9c-b8d3-9ceafc9d8449.jpg?v=1787757455"},{"product_id":"4-40-brass-hex-standoff-female-female-15mm","title":"#4-40 Brass Hex Standoff, Female-Female, 15mm","description":"\u003cp class=\"pf-crumbs\"\u003e\u003ca href=\"\/\"\u003eHome\u003c\/a\u003e › \u003ca href=\"\/collections\/pcb-standoffs\"\u003ePCB Standoffs\u003c\/a\u003e › \u003cspan\u003e#4-40 Brass Hex Standoff, Female-Female, 15mm\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e#4-40 Brass Hex Standoff, Female-Female, 15mm\u003c\/strong\u003e — a hex standoff in Brass with female threads at both ends. Used to space a printed circuit board off its chassis, to stack boards at a fixed pitch, and to mount panels and covers inside an enclosure.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eThread size\u003c\/th\u003e\n\u003ctd\u003e#4-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e15 mm (0.591 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAcross flats\u003c\/th\u003e\n\u003ctd\u003e4.76 mm (0.187 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread configuration\u003c\/th\u003e\n\u003ctd\u003eFemale-Female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBody shape\u003c\/th\u003e\n\u003ctd\u003eHex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003ePlain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandards\u003c\/th\u003e\n\u003ctd\u003eDIN 6334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMax continuous temperature\u003c\/th\u003e\n\u003ctd\u003e200 °C (392 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRoHS\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUnit weight\u003c\/th\u003e\n\u003ctd\u003e2.501 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStandard pack\u003c\/th\u003e\n\u003ctd\u003e100 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHTS classification\u003c\/th\u003e\n\u003ctd\u003e7415.29.0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAbout Brass\u003c\/h3\u003e\u003cp\u003eBrass conducts, so a brass standoff can serve as a chassis ground path. It machines cleanly, holds thread accurately at small sizes, and will not gall against steel the way stainless can.\u003c\/p\u003e\u003ch3\u003eRelated reference\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/fastener-standards-cross-reference-asme-iso-and-din\"\u003eFastener standards cross-reference: ASME, ISO and DIN\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/tap-drill-size-chart-metric-unc-and-unf\"\u003eTap drill size chart — metric, UNC and UNF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/metric-to-imperial-fastener-conversion\"\u003eMetric to imperial fastener conversion\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/bolt-head-markings-and-grade-chart\"\u003eBolt head markings and grade chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/pcb-standoffs\"\u003eAll pcb standoffs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/reference\"\u003eAll reference charts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed a quantity, a length or a material that is not listed? \u003ca href=\"\/pages\/contact-us\"\u003eSend us the specification\u003c\/a\u003e and we will source it.\u003c\/p\u003e","brand":"Planet Fasteners","offers":[{"title":"100 pcs","offer_id":52522779869415,"sku":"PF-STD-4-40-BR-FF-15","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0804\/6012\/0295\/files\/PCNCHSS_stoyka_62972558-4281-4430-8b66-94da3a9067cb.jpg?v=1787757456"}],"url":"https:\/\/planetfasteners.com\/collections\/brass-standoffs.oembed","provider":"Planet Fasteners","version":"1.0","type":"link"}